Overview of Hammer Crusher (Hammer Mill):

Hammer Crusher (Hammer Mill) is widely used in breaking and crushing various soft and hard ore whose compression strength is not higher than 320MPa (MPa), such as coal, salt, chalk, gypsum, blocks, limestone, etc.

The main working parts of Hammer Crusher (Hammer Mill) is rotors with hammers. The rotors consist of main shaft, disk, pin shaft and hammers. The motor drives the rotors to rotate quickly in the crushing cavity. Raw materials enter the crusher through the feed opening and are stricken, impacted, cut and ground by the high-speed hammer to small size. 

Working Principle of Hammer Crusher (Hammer Mill) :

The motor drives the rotor to rotate at a high speed through the belt, and on the rotor there are series of hammers. When the materials get into the working area of hammers, the rotating hammers with high rotation speed will crush them, the crushed products meeting the required size can be discharged by the outlet and become the final products, the large size products are brought back to the crushing area to be crushed again by the hammers until they reached the required size.